Cabletron Systems 6E133-25 - Manual (Page 119)

Module Specific Configuration Menu Screen
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-71
FLASH DOWNLOAD
The FLASH Download screen allows the user to force the 6E12X-26 and
6E13X-25 to download a new image file to FLASH memory from a TFTP
server. For details, refer to
Section 5.23 .
PORT REDIRECT FUNCTION
The Port Redirect Function screen allows the user to redirect traffic from
one or more ports on the module to a specific destination port on the
module. For details, refer to
Section 5.24 .
Section 5.15.9 , Setting the Operational Mode , describes how to
configure the modules to function as 802.1D switches.
BROADCAST SUPPRESSION
The Broadcast Suppression screen allows the user to set a desired limit of
receive broadcast frames per port per second. For details, refer to
Section 5.25 .
802.1Q VLAN Configuration
This menu item will only display if the module has been configured to
operate as an IEEE 802.1Q switch and the Management Mode has been
set to STAND ALONE. When selected, this menu item opens the VLAN
Main Menu screen. For details, refer to the Cabletron Systems Port Based
VLAN User’s Guide.
Section 5.15.9 , Setting the Operational Mode ,
describes how to configure the modules to function as 802.1Q switches.
Section 5.15.10 , Setting the Management Mode , describes how to set
the module to STAND ALONE management mode.
NOTE
The module does not have to be in STAND ALONE mode to
operate as an 802.1Q switch. In DISTRIBUTED management
mode, 802.1Q VLANs are created and maintained via the
802.1Q VLAN CONFIGURATION menu item on the Chassis
Menu screen. Refer to
Section 5.6 for details.