Cabletron Systems 6E133-25 - Manual (Page 47)

Using the RESET Button
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 4-7
4.4 USING THE RESET BUTTON
The RESET button located near the upper plastic locking tab of the
module (refer to
Figure 4-3 ) resets the 6E12X-26 and 6E13X-25
processor without affecting the NVRAM.
Figure 4-3 RESET Button
To reset the 6E12X-26 and 6E13X-25 processor, press and release the
RESET button. The module processor goes through a reset process of
approximately 20 seconds. Additional module downtime may be added as
the module reenters the network.
!
CAUTION
Pressing the RESET button resets the device, and all current
switching being performed by the device is halted. A module
downtime of up to two minutes will result from this action.
6E132-25
Ethernet
Reset Button