Canon MARKLL WUX10 User Manual
Page 80
Projector WUX10 MarkII User Commands
- 76 -
Revision History / Date
Changes
Revised by
Approved by
VKS
Vertical keystone setting
Format
VKS=
GET
Environment
Power
Input
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP
VIDEO
HDMI
None
X O X
-
Response
"i:OK" is returned if the parameter was set properly.
For '
GET VKS
' or '
?VKS
', current vertical keystone setting value is returned as
'
g:VKS=
'
For details on other responses, refer to the "Error List".
Description
(1) This sets the vertical keystones.
(2) This command is identical to pressing the “KEYSTONE” button on the remote control.
(3) The settable keystone range varies depending on the input signal, screen size, number of
horizontal and vertical dots, and other factors.
If keystone values are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) The GET command can be used to obtain the current vertical/horizontal keystone value. ("
GET
VKS
")
Example
Setting
> VKS=-23
This sets the vertical keystone to –23.
< i:OK
Reference
> GET VKS or ?VKS
This retrieves the vertical keystone.
< g:VKS=-23
* Commands are indicated by ">", and responses are indicated by "<".