Canon MARKLL WUX10 - Manual (Page 8)

Projector WUX10 MarkII User Commands
- 4 -
Revision History / Date Changes Revised by Approved by
Commands
Request transmissions sent from PC to the projector.
Transmission format
△ △
Character strings consisting of 0 or more alphanumeric characters.
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Type
Type Description Response
Commands with a command character string length of 0. No
command processing is performed.
■ OK
□ BUSY
■ WARN
■ ERR
Null Commands
Character string
:=
Projector control command. The format is shown below. ■ OK
■ BUSY
■ WARN
■ ERR
Control
command
Character string
:= □
Command that sets values for each parameter. The format is
shown below.
■ OK
■ BUSY
■ WARN
■ ERR
Setting
command
Character string
:= △=△
For the definition of , refer to "Parameter
definitions.
Requests current value of each parameter. The format is shown
below.
□ OK
■ BUSY
■ WARN
■ ERR
Reference
command
Character string
:=?△ | GET□