Ledilluminate – Canon MARKLL WUX10 User Manual
Page 52
Projector WUX10 MarkII User Commands
- 48 -
Revision History / Date
Changes
Revised by
Approved by
LEDILLUMINATE
Emotional LED lighting control
Format
LEDILLUMINATE=
GET
ON
This sets the LED display to ON.
OFF
This sets the LED display to OFF.
Environment
Power
Input
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP
VIDEO
HDMI
None
X O X
-
Response
"i:OK" is returned if the parameter was set properly.
For '
GET LEDILLUMINATE
' or '
?LEDILLUMINATE
', current emotional LED lighting setting is returned as
'g:LEDILLUMINATE=
For details on other responses, refer to the "Error List".
Description
(1) This command is used to control the lighting of the emotional LED.
(2) This command functions in the same way as when "System setting" - "LED illumination" are
selected on the menu.
(3) The current LED illumination setting can be obtained using the GET command. ("
GET
LEDILLUMINATE
")
Example
Setting
> LEDILLUMINATE=ON
The LED display is set to ON.
< i:OK
Reference
> GET LEDILLUMINATE or ?LEDILLUMINATE
The ON or OFF setting for the LED display is obtained.
< g:LEDILLUMINATE=ON
* Commands are indicated by ">", and responses are indicated by "<".