Pjon – Canon MARKLL WUX10 User Manual
Page 58
Projector WUX10 MarkII User Commands
- 54 -
Revision History / Date
Changes
Revised by
Approved by
PJON
Display screen at startup setting
Format
PJON=
GET
CANON Canon
logo
SKIP No
display
Environment
Power
Input
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP
VIDEO
HDMI
None
X O X
-
Response
"i:OK" is returned if the parameter was set properly.
For '
GET PJON
' or '
?PJON
', current display screen at startup setting is returned as
'g:PJON=
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen displayed at startup.
(2) This command functions in the same way as when "Display setting" - "User screen setting" -
"Startup screen" are selected on the menu.
(3) The GET command can be used to obtain the current screen displayed at startup. ("
GET PJON
")
Example
Setting
> PJON=CANON
This sets the startup screen to “Canon logo”.
< i:OK
Reference
> GET PJON or ?PJON
This retrieves the startup screen.
< g:PJON=SKIP
* Commands are indicated by ">", and responses are indicated by "<".