Canon MARKLL WUX10 - Manual (Page 36)

Projector WUX10 MarkII User Commands
- 32 -
Revision History / Date Changes Revised by Approved by
FREEZE
Freeze status
Format
FREEZE=
GET□FREEZE / ?△FREEZE
ON Image now frozen
OFF Image now not frozen
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET FREEZE ' or ' ?FREEZE ', current freeze status is returned as
'gFREEZE=ON'
'g:FREEZE=OFF'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to freeze the image.
(2) This command is identical to pressing the “FREEZE” button on the remote control.
(3) The current freeze status can be obtained using the GET command. ("
GET FREEZE
")
Example
Setting
> FREEZE=ON Freezes image.
< i:OK
Reference
> GET FREEZE or ?FREEZE The current freeze status is referenced.
< g:FREEZE=ON
* Commands are indicated by ">", and responses are indicated by "<".