Canon MARKLL WUX10 User Manual
Page 27
Projector WUX10 MarkII User Commands
- 23 -
Revision History / Date
Changes
Revised by
Approved by
BRI
Brightness setting
Format
BRI=
GET
Setting values for
Environment
Power
Input
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP
VIDEO
HDMI
None
X O X
-
Response
"i:OK" is returned if the parameter was set properly.
For '
GET BRI
' or '
?BRI
', current brightness is returned as
'
g:BRI=
'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen brightness.
(2) This command functions in the same way as when "Image adjustments" - "Brightness" are
selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current brightness can be acquired using the applicable GET command. ("
GET BRI
")
Example
Setting
> BRI=-10
This sets the brightness to -10.
< i:OK
Reference
> GET BRI or ?BRI
This retrieves the brightness.
< g:BRI=-10
* Commands are indicated by ">", and responses are indicated by "<".