Canon MARKLL WUX10 - Manual (Page 24)

Projector WUX10 MarkII User Commands
- 20 -
Revision History / Date Changes Revised by Approved by
AVOL
Audio volume adjustment
Format
AVOL=
GET□AVOL / ?△AVOL
Setting values for are 0 to 20.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET AVOL
' or '
?AVOL
', current audio volume level is returned as
' g:AVOL= '
For details on other responses, refer to the "Error List".
Description
(1) This adjusts the volume.
(2) This command is identical to pressing the “VOL+” and "VOL-" button on the remote control or
the "VOL" on the front panel.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) The volume level can be set even while the sound is muted.
(5) The GET command can be used to retrieve the current volume. ("
GET AVOL
")
Example
Setting
> AVOL=18 This sets the volume to 18.
< i:OK
Reference
> GET AVOL or ?AVOL This retrieves the volume.
< g:AVOL=18
* Commands are indicated by ">", and responses are indicated by "<".