Canon MARKLL WUX10 - Manual (Page 6)

Projector WUX10 MarkII User Commands
- 2 -
Revision History / Date Changes Revised by Approved by
2. Communication Specifications
Communication Specifications
The projector can be controlled via serial or LAN connection.
PC - Projector connection status
Item Specifications Item Specifications
Connection
system PC and projector connected on
a "1:1" basis Connection
system
TCP/IP Connection
Connection
signal line 3-line connection of SD,
RD, and SG Connection
signal line Straight when connecting via
network
Connection
cable
9pin RS-232C Cable (Cross)
Connection
cable
LAN Cable
Send Data SD SD Send Data
Receive
Data
RD RD
Receive
Data
Signal
Ground
SG SG
Signal
Ground
* Signal lines other than the three lines of SD, RD and SG are not used in the projector!
* Loop back its own signals at the PC side if necessary.
PC Projector
Dedicated cable
COM
PORT
SERVICE
PORT
Canon
Network
Connection
PC
LAN
PORT
LAN
PORT