Canon MARKLL WUX10 - Manual (Page 69)

Projector WUX10 MarkII User Commands
- 65 -
Revision History / Date Changes Revised by Approved by
RGBOFFSET
RGB offset adjustment
Format
RGBOFFSET=▽▽
GET□RGBOFFSET / ?△RGBOFFSET
Setting values for are -60 to 60.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET RGBOFFSET
' or '
?RGBOFFSET
', current RGB offset adjustment values are returned as
' g:RGBOFFSET=,, '
For details on other responses, refer to the "Error List".
Description
(1) This command is used to adjust the offset of the R, G and B colors.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Offset adjustment" are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current RGB offset values can be obtained using the GET command. ("
GET RGBOFFSET
")
Example
Setting
> RGBOFFSET=10, 11, 12 The R offset is set to 10, G offset to 11 and B offset to 12.
< i:OK
Reference
> GET RGBOFFSET or ?RGBOFFSET The RGB offset values are obtained.
< g:RGBOFFSET=-10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".