Canon MARKLL WUX10 - Manual (Page 77)

Projector WUX10 MarkII User Commands
- 73 -
Revision History / Date Changes Revised by Approved by
TEMP
Temperature inquiry
Format
GET□TEMP
Number 0 to 255
Temperature value 0.0 to 127.9 °C
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
Temperature is returned as ' g:TEMP={,} '
For details on other responses, refer to the "Error List".
Description
(1) This inquires about the temperature sensor value.
(2) Number of temperature sensors varies according to model.
(3) When returning multiple temperature sensor values, values will be separated with a comma.
There are cases when a number of sensors is 0. In this case, there will not be a comma.
(4) For correspondence of temperature sensor sequence and actual installation location, inquire
separately.
Example
Setting
None
Reference
> GET TEMP This retrieves the temperature sensor values.
< g:TEMP=5,37.1,63.0,38.9,29.7,32.4
* Commands are indicated by ">", and responses are indicated by "<".