Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual - Manual (Page 9)

Chapter 2: Programming
TruVision Analog PTZ Camera Configuration Manual 7
Chapter 2
Programming
This chapter explains how to program the cameras through a control device. The
connections or procedure may vary depending on the control device. The following
instructions show how to program using a DVR.
Access the OSD menu
To enter the main menu:
1. Connect the camera’s video and RS-485 cables to a DVR.
2. Access the DVR via its web browser or OSD menu.
3. View the live video of the PTZ camera.
4. Call preset 95 from the preset list in the PTZ control panel of the DVR to access the
OSD menu.
To move the cursor and select an item:
1. Move the cursor up/down: In live view mode, click the UP/DOWN buttons or the
FOCUS + and FOCUS- buttons in the PTZ control panel to move the cursor up and
down.