Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual - Manual (Page 16)

Chapter 2: Programming
14 TruVision Analog PTZ Camera Configuration Manual
2. Use the direction buttons to move the cursor to FOCUS and click IRIS+ to enter.
3. Click the up/down buttons to choose the focus mode: AF, MF or SAF.
AF (Auto-focus): The lens continually focuses automatically. This is the default
settings of the camera.
MF (Manual focus): Manually focus the lens.
SAF (Semi-auto focus): When the camera performs PTZ movements, the lens
automatically focuses. When the camera stops PTZ, the focus remains fixed and
does not focus on moving objects in the image.
4. Click IRIS+ to confirm.
Zoom limit
Zoom limit is a user-defined limitation of the zoom magnification (Zoom times = Optical
zoom × Digital zoom). If the zoom limit is set to its minimum value, the digital zoom is
disabled and the optical zoom function is at its maximum value. If the zoom limit is set to a
larger value, digital zoom is enabled.
To set the zoom limit:
1. Go to MAIN MENU > SYSTEM SETTINGS > CAMERA .
2. Use the direction buttons to move the cursor to ZOOM LIMIT and click IRIS+ to
enter.
3. Click up/down direction buttons to select the limit value.
4. Click IRIS+ to confirm.
Zoom speed
You can define the speed at which the lens changes from full wide zoom to the optical
zoom.
To set the zoom speed:
1. Go to MAIN MENU > SYSTEM SETTINGS > CAMERA .
2. Use the direction buttons to move the cursor to ZOOM SPEED and click IRIS+ to
enter.
3. Click the up/down buttons to select the speed: High (default), Middle, and Low.
4. Click IRIS+ to confirm.
Day/Night mode
There are two parameters available for day/night mode configuration.
1. IR CUT FILTER.
It can be set as Auto, Day or Night.