Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual User Manual
Page 30

Chapter 2: Programming
28
TruVision Analog PTZ Camera Configuration Manual
Note: You can configure up to eight tasks.
To set a task status:
1. Go to
MAIN MENU
>
SYSTEM SETTINGS
>
SCHEDULE
.
2. Move the cursor to
STATUS
and click
IRIS+
to enter edit mode
3. Click the up and down buttons to set the task status to ON.
4. Click
IRIS+
again to confirm and exit edit mode of this column.
To set a task action:
1. Go to
MAIN MENU
>
SYSTEM SETTINGS
>
SCHEDULE
.
2. Move the cursor to
ACTION
and click
IRIS+
to enter edit mode
3. Click the up and down buttons to select a task action from the list: Preset 1-8, Shadow
Tour 1-4, Preset Tour 1-8, Panning scan, Tilting scan, Random scan, Frame scan,
Panoramic scan, Day mode, Night mode, Zero calibr or None.
4. Click
IRIS+
again to confirm and exit edit mode of this column.
To set a task time:
1. Go to
MAIN MENU
>
SYSTEM SETTINGS
>
SCHEDULE
.
2. Move the cursor to
TIME
and click
IRIS+
to enter edit mode
3. Click the up and down buttons to position the cursor at
WEEK
,
START (H-M)
and
END
(H-M)
.
Note: The weekday can be set to be from
Monday to Sunday
, or
Whole Week
.
4. Click the up and down buttons to select the specific day and time.
5. Click IRIS+ to confirm and exit.