Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual - Manual (Page 29)

Chapter 2: Programming
TruVision Analog PTZ Camera Configuration Manual 27
To call a defined shadow tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > SHADOW TOUR .
2. Using a web browser, select the corresponding preset number from the drop-down list in
the control panel of the DVR. Click the arrow to call the related shadow tour. For
example, call preset 41 to call shadow tour 1.
The corresponding preset number for each
Shadow Tour is displayed.
To delete a shadow tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > SHADOW TOUR .
2. Move the cursor to CLEAR SHADOW TOUR and click IRIS+ to delete all the defined
shadow tours.
Or
Click IRIS+ to enter RECORD SHADOW TOUR . The text, DEL PATH ABOVE, appears.
Click IRIS+ to delete the shadow tour.
Note: If you delete the current shadow tour, the next shadow tours are also be deleted.
For example, if shadow tour 2 is deleted, shadow tour 3 and shadow tour 4 are also
deleted.
Schedules and tasks
A time task is a scheduled camera action that can be configured to perform automatically at
a specific time. See Figure 10 below.
Figure 10: Schedule menu
To set a task:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE .
2. Move the cursor to SCHEDULE NUM and click IRIS+ to enter edit mode
3. Click the up and down buttons to select the task number to be configured.
4. Click IRIS+ again to confirm and exit edit mode of this column.