Preset tours – Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual User Manual

Page 25

Chapter 2: Programming

TruVision Analog PTZ Camera Configuration Manual

To clear a preset setting:

1. Go to

MAIN MENU

SYSTEM SETTINGS

PRESETS

2. Move the cursor to

CLEAR PRESET

and click

IRIS+

to clear the settings of the current

preset.

Preset tours

A preset tour is a sequence of presets stored in the system memory and recalled when
required, either upon an alarm trigger, when programmed, or on manual recall. See
Figure 8 below.

Up to 32 presets can be configured in sequence for a preset tour.

Figure 8: Preset tour menu

To set a preset tour:

1. Go to

MAIN MENU

SYSTEM SETTINGS

PRESET TOUR

2. Move the cursor to

TOUR NUMBER

and click

IRIS+

to enter edit mode.

3. Click the up and down buttons to select the number of the preset tour to be configured.

4. Click

IRIS+

again to confirm and exit edit mode of this column.

Note: You can configure up to 8 Preset Tours.