Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual User Manual

Page 20

Chapter 2: Programming

TruVision Analog PTZ Camera Configuration Manual

Figure 5: Privacy masking menu

To set privacy masking:

1. Go to

MAIN MENU

SYSTEM SETTINGS

PRIVACY MASKING.

Move the cursor to

WINDOW NUMBER

and click IRIS+ to enter edit mode

Click the up and down direction buttons to select the privacy mask number to be
configured. Click IRIS+ again to confirm and exit edit mode.

3. Configure the position and size of the privacy mask.

Move the cursor to

WINDOW SETTINGS

and click IRIS+ to enter edit mode. You

will see a purple privacy mask on the live window.

The message, ADJUST WINDOW POSTION, appears on screen. Click the
direction buttons to adjust the position of the privacy mask to the designed
location.

Click FOCUS+. The message, ADJUST WINDOW SIZE, appears on screen. Click
the up/down buttons to increase/decrease the height of the mask and click
right/left buttons to increase/decrease the width of the mask. Click IRIS+ button to
save the settings and return to the previous menu. The mask becomes grey.