Haltech E6M - Manual (Page 83)

77
13.2 The Output Options Page
The Output Options Page is where all E6H/E6M options are enabled/disabled and
programmed. This page may be accessed in ONLINE or OFFLINE mode. Remember that any
changes you make in OFFLINE mode will not affect the ECU.
Pressing
ƒο
will take you to the Options Menu. Press
Ο
to go to the Output Options Page.
Alternatively use the
♣ο
hot key combination
Here, the E6H/E6M Idle Air Control and Closed Loop Control options as well as up to 2
Digital Outputs (depending on engine configuration) are shown in four windows. Current
settings are displayed for each of the options. Use the left and right arrow keys to highlight
the function you are interested in. In the case of selecting the Digital Outputs, use
♥
to cycle
through the functions, and press
←
to select the one you want. Some options cannot be used
together because they use the same hardware. These are noted in the detailed descriptions in
Chapter 16. Other restrictions apply when using the Advanced Mode. If you are using this
mode, consult Appendix B for details on these restrictions.
To adjust the parameters of the Idle Speed Control or the Closed Loop Control functions, hit
←
when that function is highlighted. In the case of the two Digital Outputs, highlight the
channel, then use the up and down arrows to move through its parameters. Strike
←
if you
wish to make a change. Some functions have maps associated with them, which are accessed
through their Options' windows.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window
may be opened by pressing
ƒΗ
. This will describe the function you are currently looking at,
and offer some explanation as to how its parameters are to be used.
13.3 The PWM Options Page
The PWM Options Page is where all E6H/E6M PWM options are enabled/disabled and
programmed. This page may be accessed in either ONLINE or OFFLINE mode. Remember
that any changes you make in OFFLINE mode will not affect the ECU.
Pressing
ƒο
will take you to the Options Menu. Press
Ω
to go to the Output Options Page.
Alternatively use the
♣Ω
hot key combination
Here, the four E6H/E6M PWM options are shown in four windows. Current settings are
displayed for each of the options. Use the left and right arrow keys to highlight the function
you are interested in. In the case of selecting the PWM Outputs, use
♥
to cycle through the
functions, and press
←
to select the one you want.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window
may be opened by pressing
ƒΗ
. This will describe the function you are currently looking at,
and offer some explanation as to how its parameters are to be used. For more detail on PWM
options see chapter 16