Haltech E6M - Manual (Page 69)

63
The Post Start Map is accessed via the Maps menu. It covers a time of sixty seconds with
each bar corresponding to 4 seconds of time. The time starts after the first input trigger is
received.
Two extra parameters are adjustable. The first is the Temperature setting and the second
indicates whether it operates Above or Below the Temperature setting. As an example, for a
rotary the temperature setting could be set to 60°C (to indicate that the motor is warm or has
been running) and the operation setting to Above. This means that Post Start will operate only
when the coolant temperature is above 60°C.
When operation “Above” is selected, the enrichment only operates at idle. For below settings,
though, the enrichment operates at all throttle positions.