Flintec DAD 141.1 - Manual (Page 22)

DAD 141.1 Technical Manual, Rev. 2.2 - February 2014 Page 22 of 54
Menu 8 – Data Communication / Continuation
8 Data Communication setup (Menu 8.1 to 8.8)
8.7 Parity Check Modbus RTU (use the UP/DOWN buttons)
No – no parity
o – odd parity
e – even parity
8.8 Protocol Selection RS 422 or RS 485 (use the UP/DOWN buttons)
SER – ASCII protocol
RTU – binary data protocol
Remark: After changing the protocol, you have to re-start the DAD 141