EVCO c-pro giga - Manual (Page 14)

C-PRO GIGA HARDWARE MANUAL
Pag. 14
Conn.
Letter
code
Description
JK-4 NO 4 normally open contact relay no. 4
JK-5 COM 5 common relay no. 5
JK-6 NO 5 normally open contact relay no. 5
JL-1 COM 6 common relay no. 6
JL-2 NO 6 normally open contact relay no. 6
JL-3 COM 7 common relay no. 7
JL-4 NO 7 normally open contact relay no. 7
JL-5 COM 8 common relay no. 8
JL-6 NO 8 normally open contact relay no. 8
YB PRG JST connector for programming purposes
YC-1 RS485+ RS 485 + serial port connector
YC-2 RS485- RS 485 - serial port connector
YC-3 GND* GND serial port connector
JM-1 AO 1 analogic output no. 1 (0,5..10 V / 4..20mA)
JM-2 AO 2 analogic output no. 2 (0,5..10 V / 4..20mA)
JM-3 AO 3 analogic output no. 3 (0,5..10 V / 4..20mA)
JM-4 AO 4 analogic output no. 4 (0,5..10 V / 4..20mA)
JM-5 GND* Common terminal for analogic outputs
C2-1 VCC* secondary power supply for optoinsulated serial ports and analogic outputs (15Vdc)
C2-2 GND* Secondary power supply reference
*1: VDC=12,5V Imax=200mA (total for all VDC terminal)
Lower board 24 VAC/DC power supply version with built-in switching feeder
Conn.
Letter
code
Description
CA-1 VCC main card power supply (24Vac/dc)
CA-2 VCC main card power supply (24Vac/dc)
Top board
Conn.
Letter
code
Description
JN-1 NC 9 normally closed contact relay no. 9
JN-2 COM 9 common relay no. 9
JN-3 NO 9 normally open contact relay no. 9
JO-1 NC 10 normally closed contact relay no. 10
JO-2 COM 10 common relay no. 10
JO-3 NO 10 normally open contact relay no. 10
JP-1 COM 11 common relay no. 11
JP-2 NO 11 normally open contact relay no. 11
JP-3 COM 12 common relay no. 12
JP-4 NO 12 normally open contact relay no. 12
JP-5 COM 13 common relay no. 13
JP-6 NO 13 normally open contact relay no. 13
JQ-1 DI 11 digital input no. 11 230 Vac
JQ-2 DI 12 digital input no. 12 230 Vac
JQ-3 COMHV common terminal for 230Vac digital inputs