EVCO EVD120 User Manual
Page 14
14
EVD120
Programming
•
press the button of EVKEY 1 s: LED Prog of EVD120 will flash and the LED of EVKEY will shed green light and
red light alternatively
•
press and release the button of EVKEY: the LED of EVD120 will go out; if the LED of EVKEY sheds green light
consider value 0, if it sheds red light consider value 1
(6)
•
press and release the button of EVKEY: LED Prog of EVD120 will light up; if the LED of EVKEY sheds green light
consider value 0, if it sheds red light consider value 2
(6)
•
press and release the button of EVKEY: LED Communication of EVD120 will light up; if the LED of EVKEY sheds
green light consider value 0, if it sheds red light consider value 4
(6)
•
press and release the button of EVKEY: LED Communication and LED Prog of EVD120 will light up; if the LED of
EVKEY sheds green light consider value 0, if it sheds red light consider value 8
(6)
•
press and release the button of EVKEY: LED Power/Status of EVD120 will light up; if the LED of EVKEY sheds
green light consider value 0, if it sheds red light consider value 16
(6)
•
press and release the button of EVKEY: LED Power/Status and LED Prog of EVD120 will light up; if the LED of
EVKEY sheds green light consider value 0, if it sheds red light consider value 32
(6)
(6)
the value to consider is not the
instrument address; the instrument
address is the sum of all the values
to consider in the procedure