EVCO EVB1256N9 User Manual
Page 6
EVCO S.p.A.
EVBOX1 | Installation guide ver. 1.2 | Code 144BOX1E124
page 6 of 88
load 5 (default to condenser fan) (3)
8 A
8 A
8 A
8 A
8 A
8 A
load 6 (default to alarm ) (3)
8 A
8 A
8 A
8 A
8 A
8 A
Communication ports
RS-485
MODBUS
for
other
EVCO
products
• • • • • • • •
Other characteristics
clock
• • • •
alarm
buzzer
• • • • • • • •
three-phase
defrost
elements
management
• •
integrated driver for unipolar stepper electronic expansion valves.
•
•
operation
at
low
and
high
relative
humidity
percentages
• • • • • • • •
overheated
condenser
alarm
management
• • • • • • • •
defrosting
adaptive
management
• • • • • • • •
"HACCP"
function
• • • •
"energy
saving"
function
• • • • • • • •
"rapid
cooling"
function
• • • • • • • •
Notes
(1)
can be set through a configuration parameter to condenser temperature, critical temperature, evaporator 2 temperature or
CPT temperature parameter.
(2)
can be set through a configuration parameter to room light, demister heating elements, auxiliary, alarms, door resistors,
neutral area operation resistors, condenser fan, compressor 2, defrosting 2 evaporator fan 2, pump down valve, on/stand-
by or man in cold room
(3)
can be set through a configuration parameter to demister heating elements, auxiliary, alarms, door resistors, neutral area
operation resistors, condenser fan, compressor 2, defrosting 2 evaporator fan 2, pump down valve, on/stand-by or man in
cold room
Available options
In some models, there is a magneto-thermal switch or differential magneto-thermal circuit breaker.
Check that the switch is available for the device; contact the EVCO distribution network.
For additional information, please read chapter "TECHNICAL DATA",