EVCO EVB1256N9 - Manual (Page 34)

EVCO S.p.A. EVBOX1 | Installation guide ver. 1.2 | Code 144BOX1E124
page 34 of 88
11.3 Cancelling the compressor
operation hours
To cancel the compressor operation hours, proceed as follows:
1. Make sure that the keyboard is not locked and that
no procedure is in progress.
2. Hold the key “DOWN” for 1 s: the display will show
the first label available.
3. Press and release the "UP" or "DOWN" key to
select “rCH”.
4. Press and release the “SET” key.
5. Press and release the “UP” or “DOWN” key within
15 s to set “149”.
6. Press and release the “SET” or do not operate for
15 sec: the display will show a flashing “- - -” for 4
sec and the “alarm” LED switches off, after which
the device will exit the procedure.
If the device does not have any alarms stored, the label “rCH”
will not be displayed.
Access the procedure to cancel the compressor operation hours
Cancelling the compressor operation hours