Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 - Manual (Page 6)

Installing the Device and Driver 6
Installing the Device and Driver
Use the following procedures to install the device and driver for the Windows 95/98 operating systems.
Note: If updating the driver, first remove the existing version of the driver. Do not use the Update option.
The following procedures assume that you have already:
• Installed the hardware
• Determined that the hardware is working properly using the power-on diagnostics
See the Hardware Installation documentation for all hardware and diagnostics information.
Note: In a new installation, the lower 10BASE-T LED should be lit (if using a 10Base-T Ethernet connection)
and the Port 1 LED should be flashing (waiting for the driver to load).
1. If necessary, extract the driver files by double-clicking on the driver file name and saving it to a diskette
or a new subdirectory on your hard drive. For example: c:\comtrol.
2. Click the Start button, and select Settings, then Control Panel.
3. Double-click on the Add New Hardware icon. The following screen appears:
4. Click the Next button. You are asked if you want Windows to search for new hardware: