Changing configuration parameters, Changing – Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 User Manual
Page 16
Changing Configuration Parameters
16
Changing Configuration Parameters
Use the following procedure to change the:
•
RocketPort Serial Hub Si properties, such as:
-
Name of the RocketPort Serial Hub Si
-
Number of ports
-
Network address
Note: You can change the network address type by clicking on the current checkbox type, followed by
placing a check in the other network type and entering the appropriate address. You also have to
change the MAC address if hot-swapping the hardware.
-
Device options such as
•
COM port properties, such as the port mode (RS-232, RS-422, or RS-485) and application-related options
discussed in
of the installation process.
Before changing the communications mode in the Setup program for an existing port, make sure
that you disconnect the peripheral device from the port.
Use the following procedure to change configuration parameters.
1.
Right click on the My Computer icon and select Properties. The System Properties window displays.
2.
Click on the Device Manager tab.
3.
Expand the Multi-function adapters entry.
4.
Select the RocketPort Serial Hub Si.
5.
Click the Properties button. The Device Properties window displays.
Caution