Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 - Manual (Page 28)

Adding Serial Printers 28
Configuring Printers
Use this subsection to configure printers for the RocketPort Serial Hub Si after installing the RocketPort
Serial Hub Si hardware and driver.
Adding Serial Printers
Follow these steps to configure a serial printer.
Note: You may need the Windows 95/98 CD-ROM in order to load drivers and complete printer installation.
Make sure you have this CD on-hand before beginning the process.
1. Connect the printer to the desired port. Use a DTE-to-DTE null modem cable unless the printer maker
specifies otherwise.
2. From the Start button menu, select Settings, then Printers.
3. Double-click on the Add Printer icon. The Add Printer Wizard starts.
4. Click Next.