Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 - Manual (Page 24)

Installing Modems 24
Configuring Modems
After installing the hardware and driver for Windows 95/98, use this discussion to configure modem COM
ports.
The RocketPort Serial Hub Si can support any asynchronous serial modem for use by any application that
uses TAPI. For information regarding port pinouts and signals, see the Hardware Installation Card.
Installing Modems
The following instructions were developed using Comtrol modem products. If you are using another brand of
modem, note that some prompts and screen descriptions may differ from those shown.
Follow these steps:
1. Connect the modem to the desired port.
2. Power up the modem.
3. Open the Control Panel window.
4. Double-click the Modems icon.
If you have no other modems installed, skip to Step 5 .
If you have already installed another modem, the Modems Properties window displays. Click the Add
button.