Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 - Manual (Page 44)

Device Advisor Driver Messages 44
Device Advisor Driver Messages
The following tables provide information about device driver summary messages and reported state
messages.
Driver Summary Messages
Message Description
Unintialized RocketPort Serial Hub Si has not been installed correctly.
Unable to contact the RPSH-Si
driver The RocketPort Serial Hub Si driver is not installed or is not responding
to Device Advisor requests.
Unable to contact a Network
Interface Controller (NIC) The server NIC card may not be installed, may be malfunctioning, or may
not be bound to RocketPort Serial Hub Si.
Cannot detect network
No inbound traffic of any sort is detected. The RocketPort Serial Hub Si
device may be inoperative or you may have a network cabling problem.
Cannot detect any RPSH-Si.
Network traffic is being received, but not from a RocketPort Serial Hub
Si device. Check the network connections and verify that the RocketPort
Serial Hub Si device is powered up.
Cannot detect RPSH-Si with
specified MAC address.
Network traffic is being received from a RocketPort Serial Hub Si device,
but not the one specified in Device Setup. Check the device to make sure
that you are using the correct MAC address in Device Setup, and check
the Main Setup window to verify that you are working with the correct
device.
RPSH-Si device with specified
MAC address was detected, but is
not configured for this server.
Either the RocketPort Serial Hub Si device in question is not assigned to
this server, or it is not assigned to any server, or it has been configured for
this server but the configuration has not been saved. If the latter, return
to the Setup window, save and exit, and restart the server
RPSH-Si device detected and
configured for this server, but is
not yet assigned to this server. Either the RocketPort Serial Hub Si device is currently being controlled
by another server or the device power has been cycled and the device is
waiting for a server to acquire it.
RPSH-Si detected, initializing.
The server has acquired the RocketPort Serial Hub Si device and is
downloading the control program. The device will be available shortly.
RPSH-Si responsive, but no data
traffic exchange since last inquiry.
The RocketPort Serial Hub Si device appears to be installed correctly and
active, but no data traffic has been sent or received since the last time
you clicked the Refresh button. If there should have been traffic, check the
RocketPort Serial Hub Si port configuration and external cabling.
RPSH-Si responsive; data traffic
received, but nothing sent since
last inquiry.
Similar to above, except the RocketPort Serial Hub Si device has received
data successfully.
RPSH-Si responsive; data traffic
sent, but nothing received since
last inquiry.
Similar to above, except the RocketPort Serial Hub Si device has sent
data successfully.
RPSH-Si active.
Normal state: the RocketPort Serial Hub Si device is installed correctly
and active with data traffic.
Poor connection to RPSH-Si.
This message displays if retransmissions occur, frames arrive out of
sequence, or more than 2% of the total packets arrive out of sequence.
This generally indicates a cable, connector, or LAN termination problem.
Counts reset. This message displays immediately after you click the Reset button.