Comtrol RocketPort Serial Hub Si Driver Installation for Windows 98 - Manual (Page 32)

Changing Printer Port Assignment 32
Changing Printer Port Assignment
To change the port assigned to a printer, follow these steps:
1. Open the Printers control panel.
2. Right-click on the icon for the printer you want to change.
3. Select the Properties option from the menu. The Properties window is displayed.
4. Click the Details tab.
Note: The Properties window also gives you access to printer test and setup options that can be very
helpful when debugging a serial printer installation.
5. Use the droplist to select the port you want to switch to. Remember to change your cabling accordingly.
6. Click on the OK button. Any changes you make take effect immediately. No reboot is needed.