Xircom realport modem 56 globalaccess adapter, Installing xircom utilities, Browse the cd and execute the setup.exe file – Comtrol DM ATS-NTe User Manual
Page 46: Select install software and tools, Xircom realport, Modem 56 globalaccess adapter
Certified PCMCIA Adapters
46
Xircom RealPort Modem 56 GlobalACCESS Adapter
Xircom RealPort Modem 56 GlobalACCESS Adapter
Although, the RealPort Modem 56 GlobalACCESS driver for this adapter is pre-
configured into the ATS-NTE as COM3, you must configure the modem in RAS
and you may need to select a country code if you are using it outside North
America.
To set up RAS, see
Configuring RAS TCP/IP for Dialin
The following subsections discuss these topics:
•
How to install the Xircom Utilities (modem documentation, diagnostic, and
CountrySelect).
•
How to set the country code if outside of the United States or Canada, after
installing the Xircom Utilities.
For support of the RealPort modem, see
.
Installing Xircom
Utilities
Use the following procedure to install the Xircom Utilities on the ATS-NTE.
1.
Place the Xircom CD (Version 2.62) in a shared CD-ROM drive on the network.
2.
Browse the CD and execute the Setup.exe file.
3.
Select Install Software and Tools.