Setting up the utilities, From the start button, select run, Select next for the initial setup window – Comtrol DM ATS-NTe User Manual
Page 43: Select next for the remaining setup options, Enabling wired equivalent privacy (wep)
Certified PCMCIA Adapters
43
Setting Up the Utilities
Setting Up the
Utilities
Use this procedure to set up the utilities for the Xircom Wireless Ethernet adapter.
1.
From the Start button, select Run.
2.
Select the Browse button, locate the
following path, and select the Ok button.
C:\Xircom CWE1130\Utilities\Setup.exe
Note: If you manually enter the path,
make sure that you enclose the
path in quotes (as illustrated).
3.
Select Next for the initial setup window.
4.
Select the appropriate
Authentication Method and the
Next button. The default
selection is None.
Note: Do NOT select LEAP
unless your wireless
network uses a LEAP-
enabled RADIUS server
for wireless login
authentication. The
machine will hang at
login time if this option is
selected and the wireless
adapter is unable to
locate an authentication
server.
5.
Select Next for the remaining setup options.
6.
Select the Finish button when the setup process has completed.
Enabling Wired
Equivalent Privacy
(WEP)
If your particular wireless network does not use WEP (Wired Equivalent Privacy)
data encryption, skip this subsection.
1.
Double-click on the Xircom Client Encryption Manager (CEM) icon on your
desktop.
Note: You must have previously installed the Xircom Utilities, see
on Page 43, if necessary.