beautypg.com

Select ok to close the network configuration popup, Select the close button in the network window, Shutdown and restart the system as prompted – Comtrol DM ATS-NTe User Manual

Page 13: Client configuration

background image

Installation and Setup

13

Client Configuration

6.

Select Use static address pool,
enter a range of valid IP
addresses, and then select the
Ok button to close the RAS
Server TCP/IP Configuration
popup.

Note: You may want to note

the Begin number
assigned to the pool
because you will need
that IP address if
dialing in through
NetMeeting.

7.

Select Ok to close the
Network Configuration
popup.

8.

Select the Continue button in
the Remote Access Setup
popup.

9.

Select the Close button in the Network window.

10. Shutdown and restart the system as prompted.

Client Configuration

Before you can manage the ATS-NTE remotely, you must set up a dial up network
connection on the client. To initiate a NetMeeting session, see

Accessing the ATS-

NTE

on Page 14.

See also other documents in the category Comtrol Accessories communication: