Comtrol DM ATS-NTe - Manual (Page 18)

PC104 RocketPort Option 18
Configuring the Serial Ports
Configuring the Serial Ports
Use the following procedure if you need to reconfigure the driver for your serial
devices.
1. Right-click the Network Neighborhood icon and select Properties.
2. Select the Adapters tab.
3. Highlight Comtrol RocketPort and select the Properties button.
4. Highlight the port for which you want to
configure COM port characteristics and
select Properties.
Note: COM4 is the default starting
COM port.
• COM1 is assigned to the CONSOLE
port.
• COM2 is assigned to the AUX A port.
• COM3 is assigned to the optional
PCMCIA Ethernet/Modem cards.