Toshiba IK - TU51CU User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(3)
2PULSE
Accumulation of charges Is started and ended through the trigger pulse input to the DC IN/SYNC terminal or
trigger signal input (LVDS) to the DIGITAL terminal, the vertical sync signal is reset and field images are
output.
Trigger pulse level
(DC IN/SYNC terminal)
Trigger pulse fetch timing
■When the trigger pulse fetch
Trigger pulse width
Trigger pulse interval
■When the trigger pulse fetch
Trigger pulse width
Trigger pulse interval
: (Low Level): Less than 0.5V , (High Level): 3.4V to 5V
: Rising edge / Falling edge / Pulse width selectable
timing is set to pulse width
: More than 16.7ms(FLD/FRM setting; FLD)
More than 33.4ms(FLD/FRM setting: FRM)
: More than 16.7ms(FLD/FRM setting: FLD)
More than 33.4ms(FLD/FRM setting: FRM)
timing is set to rising edge or falling edge
: More than 2/is
: More than 16.7ms(FLD/FRM setting: FLD)
More than 33.4ms(FLD/FRM setting: FRM)
45