Toshiba IK - TU51CU - Manual (Page 22)

(1. 2) Changing each setting in MANU mode
• Sutter mode AUTO, MANUAL, SS, EXT TRIG
- • Sutter speed setting
OFF, 1/100S, 1/250S, 1/500S, 1/1000S, 1/2000S,
1/4000s, 1/10000s
> FLD/FRM SW FLD, FRM
Freeze operation selection FRONT, TRIG^ , TRIG ^
< MODE =: MANUAL>
(a) Changing the shutter speed
0 Set the ” to MANU by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP] ------- ►
OFFil/100sil/250si l/SOOsJ 1/1000si 1/2000sJ 1/4000s^ 1/IOOOOs
◄---- [DATA DOWN]
(b) Changing the CCD storage mode
0 Set the to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the freeze operation setting
0 Set the to FREEZE INPUT by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the freeze operation by pushing [DATA UP], [DATA DOWN] buttons.
When set to FRONT : The Freeze Operation Is performed by using the FREEZE button on the front
panel.
When set to TRIG JfL : The Freeze Operation is performed at the rising edge of the rear TRIG input.
When set to TRIG tT : The Freeze Operation is performed at the falling edge of the rear TRIG input.
22