D) changing the automatic shutter zone area, F) changing the ccd storage mode, G) changing the freeze operation setting – Toshiba IK - TU51CU User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(d)
Changing the automatic shutter zone area
0 Set the ” to AREA by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the measurement light area by pushing [DATA UP], [DATA DOWN] buttons.
L
[DATA UP]
PRESET A i PRESET BJ PRESET C J PRESET D J PRESET E J USER
[DATA DOWN]
PRESET A
PRESET B
PRESET C
PRESET D
PRESET E
Custom
Selection
USER
(e) Confirming the contents of the measurement iight area seiected by the automatic shutter
0
Set the to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
(D Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When changing the area, refer
to the item “7.2 (8) Setting USER area”.
0 Push the [DISP] button to return to the menu.
(f) Changing the CCD storage mode
0 Set the to
FLD/FRM
by pushing
[MENU UP], [MENU DOWN]
buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
(g) Changing the freeze operation setting
0 Set the to FREEZE
INPUT by pushing [MENU UP], [MENU DOWN] buttons.
(D
Set the freeze operation by pushing [DATA UP], [DATA DOWN] buttons.
When set to FRONT :The Freeze Operation is performed by using the FREEZE button on the front
panel.
When set to TRIG jfL
: The Freeze Operation is performed at the rising edge of the rear TRIG input.
When set to TRIG tT
: The Freeze Operation is performed at the falling edge of the rear TRIG input.
21