Toshiba IK - TU51CU - Manual (Page 20)

(1.1) Changing each setting in AUTO mode
• Shutter mode AUTO, MANUAL, SS, EXT TRIG
• Video level adjustment -100 to 100
■ Peak and average ratio adjustment 00 : 10 to 10 : 00
• Automatic shutter response speed adjustment 1 to 10
■ Automatic shutter area selection
PRESET A, PRESET B, PRESET C, PRESET D. PRESET E, USER
• Automatic shutter area display selection
• FLD/FRM SW FLD, FRM
• Freeze operation selection FRONT, TRIG -iP-, TRIG '\r
< MODE = AUTO>
(a) Changing the video ievei in the automatic shutter mode
0 Set the to LEVEL by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the video level by pushing [DATA UP], [DATA DOWN] buttons.
The value increases by pushing [DATA UP]
.100 ^----------- ► 0 ♦---------- ► 100
The value decreases by pushing [DATA DOWN]
(b) Changing the automatic shutter detection (ratio between peak and average vaiue)
0 Set the to PEAK/AVE by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the ratio between peak and average value by pushing [DATA UP], [DATA DOWN] buttons.
(Peak: Average) -♦ The peak value increases by pushing [DATA UP]
00:10^--------- ► 05:05 --------- ► 10:00
The peak value decreases by pushing [DATA DOWN]
(c) Changing the automatic shutter response speed
0 Set the to SPEED by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the response speed by pushing [DATA UP], [DATA DOWN] buttons.
The response speed becomes faster by pushing [DATA UP]
1^---------- ► 5 ◄-------- -► 10
^ The response speed becomes slower by pushing [DATA DOWN]
20