4) changing each setting in ext trig mode, A) changing inputting trigger pulse setting, B) changing 1 pulse exposure time setting – Toshiba IK - TU51CU User Manual

Page 24: 06ms ► 0.4ms “4 ► ims-4 ► 16ms, 1) changing each setting in auto mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

(1. 4) Changing each setting in EXT TRIG mode

The EXT TRIG has four modes; 1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C.

First set the to MODE and select EXT TRIG, then set the to EXT TRIG and select the desired EXT

TRIG mode.

(1. 4. 1) Changing each setting in 1 PULSE SNR mode

• Shutter mode AUTO, MANUAL, SS, EXT TRIG

• EXT TRIG mode

1 PULSE SNR, 1 PULSE SR, 2PULSE, RS232C

Input trigger pulse setting at 1 PULSE SNR and 1 PULSE SR

-4T ... The rising edge
^ ••• The falling edge

• Exposure time setting at 1 PULSE SNR and 1 PULSE SR

0.06ms ◄-----► 0.4ms

-----► Ims"^---- ►16ms

0.02ms step 0.1 ms step 1 ms step

< MODE = EXT TRIG EXT TRIG = 1 PULSE SNR>

(a) Changing inputting trigger pulse setting

® Set the to TRIG PULSE by pushing [MENU UP], [MENU DOWN] buttons.

(D Select either^ or by pushing [DATA UP], [DATA DOWN] buttons.

* This setting is only valid in the 1 PULSE mode (1 PULSE SNR and 1 PULSE SR). To make the trigger

pulse setting when using the 2PULSE mode, first set the EXT TRIG mode to 2PULSE, then make the

settings with the TRIG PULSE items.

(b) Changing 1 PULSE exposure time setting

0 Set the to EXPOSURE by pushing [MENU UP], [MENU DOWN] buttons.

Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

[DATA UP] ------- ►

0.06ms-------------------- ► 0.4ms “4-----------------► ims-4------------------ ► 16ms

(0.02ms step)

(0.1ms step)

- [DATA DOWN]

(1ms step)