Optional s-video cables – RCA CC9370 User Manual

Page 76

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Optional S-Video Cables

Attaching a Core Filter to
an Optional S-Video Cable

Your digital camcorder and some TVs

and video units have an S-Video jack,
S-Video provides excellent video
transfer abilities (not sound). You can
purchase an S-Video cable at many
retail electronics stores.

When using an S-Video cable, it must

have a Core Filter attached to meet

FCC requirements. The Core Filter
reduces picture interference.

A core filter is supplied with this
digital camcorder.

Attaching the Core Filter to an
Optional S-Video Cable

1, Release the stoppers on both ends

of the Core Filter and open.

Stoppers

4. Loop the cable back through the

Core Filter casing.

5. Close the Core Filter until it clicks

shut. The S-Video cable is now

ready for use.

Note:

When working with an S-Video

cable, attach the end with the Core Filter
to the camcorder.

2. Run the cable through the Core

Filter, leaving approx, 1 1/4 inches
of cable between the cable plug
and the Core Filter casing.

S-Video

Cable

3. Wind the cable once around the

outside of the Core Filter. Make

sure not to leave slack in the

cable.