Charging the battery, Fowering the camcorder – RCA CC9370 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fowering the Camcorder

Charging the Battery

If the DC cable is attached to the
DC OUT jack on the Adapter/Charger,
remove it.

Make sure the arrow on the

battery faces up and points to the

Adapter/Charger’s POWER light.

2. Hold the battery flush against the

Adapter/Charger and slide it in
the direction of the arrow.

3. Plug the Adapter/Charger into the

nearest AC power outlet (100
240V, 50/60HZ).

4. If the battery is properly

connected, the CHARGE
indicator blinks.

POWER Indicator

Note:

if you try to charge a battery

that has not been charged for a long
period of time, it may take a few
minutes for the CHARGE indicator
to flash,

5. After the battery is charged, the

CHARGE indicator stops

blinking and remains lit,

. Remove the charged battery by

sliding it off the Adapter/Charger.

7. Attach the charged battery to the

camcorder as described on the
previous page.

Lithium-ion
Rechargeabie Battery
model 247800 (or
optional model BB46L)

To AC Wail Outlet

100-240 Volts, 50/60 Hz.

Adapter/Charger

model 247801

CHARGE Indicator

DC OUT Jack

When a battery is attached, to the Adapter/Charger, do not turn them .

upside down. The battery may fall off and be damaged or cause injury.