Gain up, Setting gain up, Tally light – RCA CC9370 User Manual

Page 41: Turning the tally light on or off, On-screen menus

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

On-Screen Menus

• lOX

the maximum optical

zoom. If the camcorder is using
digital zoom and then is set to

1 OX zoom mode, the

magnification will reset.

• 40X

allows use of digital

zoom. By digitally processing
and magnifying images,
zooming is possible from lOX
(the optica] limit) to 40X,

• 250X

allows use of digital

zoom. By digitally processing
and magnifying images,
zooming is possible from lOX
(the optical limit) to 250X.

4. Press in the MENU/BRIGHT dial

to activate the choice.

5. To exit menus, rotate the MENU/

BRIGHT dial to highlight

RETURN. Press in the MENU/

BRIGHT dial twice to return to

normal viewing.

Gain Up

This camcorder allows you to adjust

the shutter speed to compensate for
various recording settings.

Setting Gain Up:

1. Rotate the MENU/BRIGHT dial

to highlight the CAMERA MENU

icon (EH). Press in the MENU/
BRIGHT dial to highlight the
submenus.

2. Rotate the MENU/BRiGHT dial

to highlight GAIN UP. Press in the

MENU/BRIGHT dial to display

the submenus.

3. Rotate the MENU/BRIGHT dial

to highlight the desired setting.

• OFF

allows shooting of dark

scenes with no picture

brightness,

• AGC the overall appearance

may be grainy, but the image is

bright.

• AUTO

(Aiic-)

the shutter

speed is automatically adjusted
(1/30 - 1/200 of a second).
Shooting a subject in low or
poor lighting at 1/30 of a
second provides a brighter
image than in the AGC mode,

but the subject's movements are

not as smooth or natural. The
overall appearance may be
grainy. When the shutter is
automatically adjusted, the
icon appears in the LCD or
viewfinder.

4. Press in the MENU/BRIGHT dial

to activate the choice.

5. To exit menus, rotate the MENU/

BRIGHT dial to highlight

RETURN. Press in the MENU/

BRIGHT dial twice to return to

normal viewing.

Tally Light

The tally light on the front of the

camcorder comes on to signal the
start of recording. You can turn this
light on or off.

Turning the Tally Light On or Off:

1, Rotate the MENU/BRIGHT dial

to highlight the CAMERA MENU

icon (E3). Press in the MENU/
BRIGHT dial to highlight the
submenus.