Record inj – RCA CC9370 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Record inj;

W^i'ning

The video light and bulb need to cool for approximately 3Q.min.utes after .

the camcorder has been.used before the bulb assembly is replaced- : ’ ; -

Do not touch the. light bulb with your fingers. If the.bulb. Is accidentally,

touched, wipe ¡t with a soft cloth. A dirty bulb may cause smoke and have a

reduced service.life...

Video Light Details

Even if the battery indicator —i)
does not blink due to low battery
charge, the camcorder may turn off
automatically when you turn on the
video light, or if the video light is
turned on when you start a recording.

• When LIGHT OFF/AUTO/ON

switch is set to AUTO:

• The video light may keep

turning on and off depending on
the lighting conditions. If this
happens, manually switch the

light ON or OFF using the

LIGHT OFF/AUTO/ON switch,

• If Slow Shutter mode is turned

on, the video light is likely to

stay on.

• While in Twilight mode, the

light will not activate,

• To replace the video light. It is

recommended that you consult
your nearest camcorder dealer.

Video Light