RCA CC9370 - Manual (Page 52)

Playback
Still Playback Mode
Still playback pauses the tape,
freezing a single frame on the display.
Activating Still Playback:
1, Press the Play/Pause Button (►/II)
during playback to freeze the image,
2. To resume normal playback, press
the Play/Pause Button again.
• If still playback continues for
more than a few minutes, the
camcorder’s stop mode is
automatically engaged,
• After approximately five
minutes in stop mode, the power
turns off to conserve power.
• When the Play/Pause Button is
pressed, the image may not
freeze immediately. The
camcorder takes a moment to
stabilize the still image.
Shuttle Search
Allows high-speed searching in either
forward or reverse directions.
Activating Shuttle Search:
1, Press the Fast-Forward Button
(►►) or the Reverse Button (-4<)
during playback.
2, To resume normal playback, press
the Play/Pause Button (►/11).
• During playback, press and hold
the Reverse (◄^) or Forward
(►►) Button. The search
continues as long as the button
is held. Once released, normal
playback resumes,
• A slight mosaic effect appears
on screen during Shuttle Search.
This is normal.
Frame-By-Frame Playback
Allows frame-by-frame searching,
1. Press the Play/Pause Button (^11)
during playback to pause the image.
2. Rotate the MENU/BRIGHT dial
towards + for forward frame-by­
frame playback, or towards - for
reverse frame-by-frame playback.
• To resume normal playback,
press the Play/Pause Button (►/II).
Basic Connections
This manual includes information for
some basic types of connections.
Displaying Camcorder Data on a
Connected TV or VCR
• Date/Time; set DATEITIME to ON
or OFF in the DISPLAY menu.
• Time Code; set TIME CODE to
ON or OFF in the DISPLAY menu.
• Playback Sound Mode, Tape
Speed and Tape Running; set ON
SCREEN to LCD or SIMPLE in
the DISPLAY MENU.
Notes:
It is recommended to use the AC Adapter/
Charger as the power supply instead of
the battery pack to achieve uniform
playback.
Use the provided A/V Connection Cable,
making sure to connect the end with a
single plug to the camcorder.
Adjust the TV sound volume to its
minimum level to avoid a sudden burst of
sound when the camcorder is turned on.
If you have a T V or speakers that are not
specially shielded, do not place the
speakers next to the TV as interference
will occur in the camcorder playback
picture.
50