RCA CC9370 - Manual (Page 69)

Trouble Checks
Froulilc Checks and Adjustments........................................
An error indication
(EOl — E06)
appears on-screen.
• Remove the power supply (battery pack, etc.) and
wait a few minutes for the icon to clear. When it
does, reattach the power supply, turn on the
camcorder’s power, and resume recording.
If the indication remains after repeating the above
procedure two or three times, consult your nearest
camcorder service technician.
The charger
indicator on the AC
Adapter/Charger
does not light.
• To protect the battery, it is recommended to
charge it in places with a temperature of 50-95
degrees Fahrenheit (10°C to 35°C) (pages 13-14).
No picture appears
on the LCD
monitor.
• Remove the lens cap.
• Adjust the brightness of the LCD monitor
(page 22).
• If the LCD is rotated forward, make sure it is fully
rotated 180 degrees.
When the
camcorder is
connected via the
IEEE 1394
connector, the
camcorder does not
operate.
• Turn the camcorder’s power off and on again.
67