RCA CC9370 - Manual (Page 53)

Viewing Recordings on a TV Using A/V Input Jacks
Playback
Connecting the Camcorder to a
TV Using A/V Input Jacks:
1. Locate the A/V cable that came
with the camcorder.
2. Make sure all units are turned off.
3. Connect the white plug of the A/V
cables to the Left AUDIO IN jack
(L AUDIO IN).
4. Connect the red plug of the
A/V cables to the Right AUDIO
IN jack (R AUDIO IN).
Note: Some TVs do not offer both left
and right audio jacks, if your T V only has
one audio jack, use the A/V cable’s white
plug for audio.
5. Connect the yellow plug of the
A/V cables to the VIDEO IN jack,
6. Open the camcorder’s Connector
Cover,
7. Connect the A/V Connection
Cable’s single plug into the
camcorder’s A/V Jack.
8. Press in the Thumb Lock and
rotate the Power Switch to
playback (EEJ) mode.
9. Turn on the TV.
10. Tune the TV to its video input
channel for viewing.
11. Press the camcorder’s Play/Pause
Button (►/II) to begin playback.
Note: The camcorder and some TVs have
an S-Video Jack which can be used for a
better image quality. If using an optional
S"Vtdeo Cable, it must have a core filter
to meet FCC requirements.
51