Lzzz..\sy zzrrz-.zr i:::y jgg – Kenwood TH-27A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ BATTERY VOLTAGE LEVEL METER
The meter indicates the relative battery voltage during
transmit.
Recharge or replace the batteries when the level reaches
the low indicator.
NiCd Battery pack
Fully charged
Fully discharged
___________
r
----
7
L..7
■
■
Approximate battery condition
OPERATING TIME
H
M
L
EL
TH-27A
TH-27E
PB-13
2
2.5
4
15
Alkaline B.
-
-
0.8
5.5
Manganese B.
2
2
3
6.5
TH-47A
TH-47E
PB-13
2
2.5
4
13.5
Alkaline B.
-
-
0.8
4.5
Manganese B.
2
2.5
3
6
• 1 minute transmission. 3 minutes reception, AF output
0.2 W/8 n.
• Battery saver function on.
CAUTION
The display indicator flashes and the POWER switch
will not work when the battery starts to go flat.
When this happens, recharge or replace the battery.
We recommend use of the NiCd battery pack for long
transmission or extended operation.
Manganese batteries (except Alkaline manganese batter
ies) is available for Low or EL position.
■ MANGANESE or ALKALINE BATTERIES
Load 6
X
R6 (AA) manganese or alkaline batteries in
series in the optional battery case(BT-B). (Be sure to
observe the polarities.)
(We recommend use of high perfomance manganese
batteries.)
Be sure the pack and transceiver are locked together.
Manganese or Alkaline batteries
New batteries
Need to change batteries
_________________________
__________,
LZZZ..\Sy zzrrz-.zr
i:::y
jgg
■ ■
■
Approximate battery condition