Kenwood TH-27A User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. If a signal is present a beep is heard from the speaker.
5. To turn this function off repeat step 3. The AL
indicator goes off.
• Alert Channel Display
Press the SHIFT key while turning on the Power to switch
the Alert methods to "Alert Channel Display".
In this method if a signal is present beep will sound and
the transceiver will switch to the frequency stored in
memory channel 1. (Press the 1/AL key to return to the
previous channel.)
To turn this method off press the SHIFT key again while
turning on the power.
NOTE
1. Even if CTCSS function is activated in the memory
chani iel 1, CTCSS is not checked.
2. While memory channel 1 is being scanned you will
not hear voice communications, only a beep is
heard if a signal is present.
3. There is no Alert when the DTSS, or Paging
function are on.
27