Waiting with individual code – Kenwood TH-27A User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Tune to the predetermined frequency.
2. Press the F key, then press the DTSS/PAG key to enter
THE PAGING MODE.
4-9-4. Paging Reception (Wait)
Waiting with individual code.
3. When called with your station ID code, the memory
number automatically change to 0. The ID code of the
calling station is displayed. (For KENWOOD'S trans
ceivers. This also applies to the following descrip
tions.) (Example: Frequency: 145.660 MHz, calling
station code: 444)
4. The squelch is opened and the calling other party is
heard. (The individual code of the calling station is
stored in memory 0.)
5. Press the PTT switch to respond to the calling station.
After the local station has been called, cancel paging.
Communication can be performed more efficiently.
If the remote station code can not be recognized, E
appears on the display panel.)
P flashes.
Zero is displayed to indicate that the station
being called.
39